Â鶹ÊÓƵ

• If it beeps and still lets you in the room, the battery is low. If the battery in your reader is low, report it to your RA or the housing office. They’ll contact maintenance or the Resnet office to have the battery changed.

• If it beeps and flashes red-green and doesn’t let you into your room, it means the battery is too low to open the lock. to your RA or the housing office. They’ll contact maintenance or the Resnet office to have the battery changed.

• If the lock flashes green and beeps, then your card is not programmed for the door and is possibly programmed for another door. RA staff or the Housing office in Ruddock can help you get your card encoded for your room.

• If the reader momentarily flashes red when you swipe your card and doesn’t let you in, this means that the card is not encoded at all. RA staff or the Housing office in Ruddock can help you get your card encoded for your room.

You can have your card encoded for your room by your RA at your hall office. If the office is closed or has problems with your card, you can get this done at the Housing Office located in Ruddock Hall.

When you get your card from the I-Card office, it comes encoded with an ABA number (the 16-digit number on the bottom of the card), and this number is what gives you building access. You should have access to the building you’re assigned to. If your card does not give you access to your building when you get here, contact a Housing employee for help.

If you live in Stephenson or Putt, you need to get your new I-Card encoded for your room. You can do this at your hall office or the housing office. If you turned in a damaged card for a new one, the new card should immediately work on the hallway doors. However, if you lost your I-Card, it may take up to an hour for the new card to work as the new number is downloaded to the system. If your new I-Card does not work on the hallway doors after an hour, report it to your RA or to the housing office. They can contact the Housing Resnet office to have your new number programmed.

If they can’t encode your card for your room, it’s likely that your card is damaged. Normal wear and tear on a magnetic strip wears the magnetic strip eventually to the point that it won’t hold information. At that point, you need to get a new I-Card from the I-Card Office in Clark Hall. Your new card will need encoded for your room.

Your hall office or the Housing office can issue a temporary card encoded for your room so you can get in and get your card. This card must be returned immediately after retrieving your I-Card, and your I-Card must be reencoded for your suite. There is a lockout charge for this service.

You can pay for laundry, vending, and printing through a Crimson Cash account on your card. This is distinct from Dining’s Flex dollars. For more information about I-Cards and your Crimson Cash account, please see the university’s I-Card page.

You will use your I-Card at the dining halls to access your meal plans and Flex dollars.